Genie TZ-50 User Manual download pdf (Page 14)

12 Genie TZ-50 Part No. 114164

Operator's Manual Second Edition • First Printing

Pre-operation Inspection

R Be sure that the operator's, safety and

responsibilities manuals are complete, legible

and in the storage container located on the

platform.

R Be sure that all decals are legible and in place.

See Decals section.

R Check for hydraulic oil leaks and proper oil

level. Add oil if needed. See Maintenance

section.

R Check for battery fluid leaks and proper fluid

level. Add distilled water if needed. See

Maintenance section.

R Check for proper tire pressure and lug nut

torque. Add air to tires if needed. See

Maintenance section.

R Models with engines: Check for engine oil leaks

and proper fluid level. Add oil if needed. See

Maintenance section.

Check the following components or areas for

damage, improperly installed or missing parts and

unauthorized modifications:

R Electrical components, wiring and electrical

cables

R Hydraulic power unit, reservoir, hoses,

fittings, cylinders and manifolds

R Boom components and wear pads

R Tires and wheels

R Trailer lights and reflectors

R Parking brake components

R Outriggers and foot pads

R Limit switch and alarms

R Nuts, bolts and other fasteners

R Platform entry mid-rail/gate

R Platform ladder (if equipped)

PRE-OPERATION INSPECTION

R Surge brake components

R Safety chains (if required)

R Light and brake cables

R Engine and related components

(if equipped)

R Mechanical brake components

(if equipped)

R Axle components

R Beacon and alarms (if equipped)

Check entire machine for:

R Cracks in welds or structural components

R Excessive rust, corrosion or oxidation

R Dents or damage to machine

R Be sure that all structural and other critical

components are present and all associated

fasteners and pins are in place and properly

tightened.

R Be sure that the batteries are in place and

properly connected.

R Models equipped with hydraulic surge brake

systems:

Check the hydraulic oil level in the surge brake.

Check for leaks.

R After you complete your inspection, be sure

that all compartment covers are in place and

latched.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 40 41

Comments to this Manuals

No comments