Genie TZ-50 User Manual download pdf (Page 5)

Part No. 82900 Genie TZ-50 3

Operator's Manual

First Edition • Sixth Printing

Do not depend on the tilt alarm as a level indicator.

The tilt alarm sounds only when the machine is on

a severe slope.

When the tilt alarm sounds, immediately lower the

boom and adjust the outriggers to level the

machine.

Do not alter or disable the limit switches.

Do not operate the

machine in strong or

gusty winds. Do not

increase the surface

area of the platform or

the load. Increasing the

area exposed to the

wind will decrease

machine stability.

Do not alter or disable machine components that in

any way affect safety and stability.

Do not replace items critical to machine stability

with items of different weight or specification.

Do not modify or alter an aerial work platform

without prior written permission from the

manufacturer. Mounting attachments for holding

tools or other materials onto the platform, toeboards

or guard rail system can increase the weight in the

platform and the surface area of the platform or the

load.

Do not transport tools and materials unless they are

evenly distributed and can be safely handled by

person(s) in the platform.

Do not place ladders or scaffolds in the platform or

against any part of this machine.

Do not use the machine on a moving or mobile

surface or vehicle.

SAFETY RULES

Be sure all tires are properly inflated and in good

condition and lug nuts are properly tightened.

Do not use the platform as a crane.

Do not place loads outside the platform perimeter.

Do not place or attach overhanging loads to any

part of the platform.

Do not push off or pull

toward any object outside

of the platform.

Maximum allowable

manual force, CE 400 N

Do not push the machine or other objects with the

boom.

Do not use the platform controls to free a platform

that is caught, snagged or otherwise prevented

from normal motion by an adjacent structure. All

personnel must be removed from the platform

before attempting to free the platform using the

ground controls.

Do not use batteries that weigh less than the

original equipment. Four batteries are used as

counterweight and are critical to machine stability.

Each battery must weigh 65 pounds / 29.5 kg.

Do not contact adjacent structures with the boom.

Do not tie the boom or platform to adjacent

structures.

1 2 3 4 5 6 7 8 9 10 ... 38 39

Comments to this Manuals

No comments

Genie TZ-50 User Manual Page 5

Comments to this Manuals

Related products and manuals for Tools Genie TZ-50