Genie TZ-50 User Manual download pdf (Page 4)

2 Genie TZ-50 Part No. 82900

Operator's Manual First Edition • Sixth Printing

SAFETY RULES

Electrocution Hazards

This machine is not electrically insulated and will

not provide protection from contact with or

proximity to electrical current.

Maintain safe distances from electrical power lines

and apparatus in accordance with applicable

governmental regulations and the following chart.

Voltage Minimum Safe

Phase to Phase Approach Distance

Feet Meters

0 to 300V Avoid Contact

300V to 50KV 10 3.05

50KV to 200KV 15 4.60

200KV to 350KV 20 6.10

350KV to 500KV 25 7.62

500KV to 750KV 35 10.67

750KV to 1000KV 45 13.72

Allow for platform movement, electrical line sway or

sag and beware of strong or gusty winds.

Keep away from the machine if it contacts

energized power lines. Personnel on the ground or

in the platform must not touch or operate the

machine until energized power lines are shut off.

Do not operate the machine during lightning or

storms.

Do not use the machine as a ground for welding.

Tip-over Hazards

Occupants, equipment and materials shall not

exceed the maximum platform capacity.

Maximum capacity

ANSI and CSA models 500 lbs 227 kg

CE models 440 lbs 200 kg

Maximum occupants 2

Do not raise the boom unless the machine is level.

Do not set the machine up on a surface where it

cannot be leveled using only the outriggers.

Do not raise the boom unless all four outriggers are

lowered, the footpads are in firm contact with the

ground and the machine is level.

Do not set the machine up unless it is on a firm

surface. Avoid drop-offs, holes, unstable or

slippery surfaces and other possible hazardous

conditions.

Do not move the machine when the boom is raised.

Do not adjust or stow the outriggers when the boom

is raised.

1 2 3 4 5 6 7 8 9 ... 38 39

Comments to this Manuals

No comments

Genie TZ-50 User Manual Page 4

Comments to this Manuals

Related products and manuals for Tools Genie TZ-50