Genie TZ-50 User Manual download pdf (Page 30)

28 Genie TZ-50 Part No. 82900

Operator's Manual First Edition • Sixth Printing

Transport and Lifting Instructions

Observe and Obey:

The transport vehicle must be parked on a level

surface.

The transport vehicle must be secured to

prevent rolling while the machine is being

loaded.

Be sure the vehicle capacity, loading surfaces

and chains or straps are sufficient to withstand

the machine weight. See the serial plate for the

machine weight.

Securing to Truck or Trailer for

Transit

Fully lower and retract the boom. Make sure the

boom and the mid-pivot rest securely in the mast

cradles.

Securely latch the boom hold-down latches.

Raise all four outriggers to the stowed position.

Always chock the machine wheels in preparation

for transport.

Turn the key switch to the off position and remove

the key before transporting.

Inspect the entire machine for loose or unsecured

items.

Securing the Chassis

Place a block under the tongue.

Place a block underneath the axle between the two

wheels.

Use the four tie-down points on the chassis for

anchoring down to the transport surface.

Use chains or straps of ample load capacity.

Use a minimum of 4 chains to secure the chassis.

Secure a strap over the tongue of the machine.

Adjust the rigging to prevent damage to the chains.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

No comments

Genie TZ-50 User Manual Page 30