Genie TZ-50 User Manual download pdf (Page 15)

Part No. 82900 Genie TZ-50 13

Operator's Manual

First Edition • Sixth Printing

Maintenance

Observe and Obey:

Only routine maintenance items specified in this

manual shall be performed by the operator.

Scheduled maintenance inspections shall be

completed by qualified service technicians,

according to the manufacturer's specifications

and the requirements specified in the

responsibilities manual.

Maintenance Symbols Legend

The following symbols have been

used in this manual to help

communicate the intent of the

instructions. When one or more of

the symbols appear at the

beginning of a maintenance

procedure, it conveys the meaning

below.

Indicates that tools will be required to

perform this procedure.

Indicates that new parts will be required

to perform this procedure.

Check the Batteries

Proper battery condition is essential to good

machine performance and operational safety.

Improper fluid levels or damaged cables and

connections can result in component damage and

hazardous conditions.

This procedure does not need to

be performed on machines with

sealed or maintenance-free

batteries

Electrocution hazard. Contact with

hot or live circuits could result in

death or serious injury. Remove all

rings, watches and other jewelry.

Bodily injury hazard. Batteries

contain acid. Avoid spilling or

contacting battery acid. Neutralize

battery acid spills with baking soda

and water.

1 Put on protective clothing and eye wear.

2 Be sure that the battery cable connections are

tight and free of corrosion.

3 Be sure that the battery hold-down brackets are

secure.

4 Remove the battery vent caps.

5 Check the battery acid level. If needed,

replenish with distilled water to the bottom of the

battery fill tube. Do not overfill.

6 Install the vent caps.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Comments to this Manuals

No comments