Genie GS_3384 RT Specifications download pdf

www.genielift.com

Model GS-3384 RT

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.

** Based on RT tires. Deduct 2 in (5.8 cm) for turf and non-marking.

*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.

**** Weight will vary depending on options and/or country standards.

Measurements US Metric

Working height maximum* 39 ft 12.06 m

Platform height maximum 33 ft 10.06 m

Platform height - stowed** 5 ft 1 in 1.55 m

Platform length: 13 ft .5 in 3.98 m

outside, extended - single deck 17 ft 6.25 in 5.34 m

outside, extended - dual deck 21 ft 6.5 in 6.57 m

Slide-out platform extension deck - front 5 ft 1.52 m

Slide-out platform extension deck - rear 4 ft 1.22 m

Platform width - outside 6 ft 1.83 m

Height - stowed: folding guardrails 8 ft 9.5 in 2.68 m

rails lowered 6 ft 6.75 in 2.0 m

Length - stowed: single deck 12 ft 11.25 in 3.94 m

dual deck 13 ft 5 in 3.98 m

with outriggers 16 ft 4.88 m

Width: standard tires 7 ft 2.13 m

high flotation tires 7 ft 11 in 2.41 m

Wheelbase 9 ft 4 in 2.84 m

Ground clearance - center 13 in .33 m

Productivity

Maximum platform occupancy 7 7

Lift capacity 2,500 lbs 1,134 kg

Lift capacity - extension deck 500 lbs 227 kg

Drive speed - stowed 4.0 mph 6.4 km/h

Drive speed - raised 0.7 mph 1.1 km/h

Gradeability - stowed*** 50%

Maximum outrigger leveling: front to back 7º

side to side 12º

Turning radius - inside 10 ft 1.5 in 3.09 m

Turning radius - outside 19 ft 6 in 5.94 m

Raise/lower speed 45/29 sec

Controls proportional

Drive four wheel

Tires - foam-filled rough terrain 10 x 31 in 25 x 79 cm

Power

Power source Ford DSG-423 4 cylinder gas/LPG

75 hp (56 kW)

Deutz D2011L03i 3 cylinder diesel

49 hp (36 kW) air cooled

Auxiliary Power unit 12 V DC

Fuel tank capacity 30 gal 113.6 L

Hydraulic system capacity 30 gal 113.6 L

Weight****

12,005 lbs 5,445 kg

with outriggers 13,680 lbs 6,205 kg

Standards Compliance ANSI A92.6, CSA B354.2, CE Compliance, AS 1418.10

™

-3384 RT

Self-Propelled Scissor Lifts

Speciﬁ cations

1 2

Self-Propelled Scissor Lifts 1

Summary of Contents

Page 1 - Self-Propelled Scissor Lifts

www.genielift.com Model GS-3384 RT * The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** Ba

Page 2

Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings i

Comments to this Manuals

No comments

Genie GS_3384 RT Specifications

Browse online or download Specifications for Power generators Genie GS_3384 RT. Genie GS_3384 RT Product Specifications User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Power generators Genie GS_3384 RT