Genie TMZ-10 User Manual download pdf (Page 6)

4 Genie TMZ-50/30 & Genie TMZ-17/10 Part No. 72896

Operator's Manual First Edition • Third Printing

Collision Hazards

Be aware of boom position when rotating the

turntable.

The machine must be on a level surface or

secured before releasing the parking brake.

Use the parking brake to control the speed of the

machine when pushing a machine that is not

attached to a tow vehicle.

Check the work area for overhead obstructions or

other possible hazards.

It is recommended that operators wear an

approved hard hat when operating the machine.

Do not lower the boom unless the area below is

clear of personnel and obstructions.

Do not operate a boom in the path of any crane

unless the controls of the crane have been locked

out and/or precautions have been taken to prevent

any potential collision.

No stunt driving or horseplay while operating the

machine.

Component Damage Hazards

Do not use the machine as a ground for welding.

Do not fully lower the booms unless the booms are

aligned with the tongue. The booms must be

lowered onto the boom rests.

Do not use any battery or charger greater than 12V

to jump-start the engine.

SAFETY RULES

Lifting Hazards

Use proper lifting techniques to move the machine.

Use proper lifting techniques when installing or

removing the platform.

Explosion and Fire Hazards

Do not start the engine if you smell or detect liquid

petroleum gas (LPG), gasoline, diesel fuel or other

explosive substances.

Do not refuel the machine with the engine running.

Refuel the machine and charge the battery only in

an open, well-ventilated area away from sparks,

flames and lighted tobacco.

Do not operate the machine in hazardous locations

or locations where potentially flammable or

explosive gases or particles may be present.

1 2 3 4 5 6 7 8 9 10 11 ... 33 34

Comments to this Manuals

No comments

Genie TMZ-10 User Manual Page 6

Comments to this Manuals