Genie TMZ-10 User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
Part No. 72896 Genie TMZ-50/30 & Genie TMZ-17/10 25
Operator's Manual
First Edition • Third Printing
OPERATING INSTRUCTIONS
Optional Drive System Operating
Instructions
1 Be sure the platform is fully lowered. The drive
function will not operate unless the platform is
fully lowered.
2 Set the parking brake on the tongue. The drive
function will not operate unless the parking
brake is set.
3 Push and hold the auto-level button. Push and
hold the retract outrigger button. Fully retract
the outriggers.
4 Press and hold the function enable button.
5 Move the drive control off center. Use the color-
coded direction arrows on the control panel to
determine the direction of machine travel.
6 Before raising the platform, lower the outriggers
and adjust to level the machine and raise the
wheels slightly off the ground.
Note: The machine level indicator light on the drive
control panel should be on.
Backing Up with Trailer
(if equipped with surge brake)
The surge brake system must be released before
backing up.
Consult the surge brake system manual for
specific instructions on each surge brake.
Be sure that the machine is returned to towing or
operating configuration when finished.
Transport
(not attached to a tow vehicle)
Use the parking brake to control the speed of the
machine when pushing a machine that is not
attached to a tow vehicle.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Rotate the turntable so that the platform is
opposite the tongue of the machine. Use the
black arrows to properly align the turntable.
3 Lower the boom to the stowed position.
4 Secure the boom with the hold-down latches.
5 Turn the key switch to the OFF position and
remove the key to secure from unauthorized
use.
6 Chock the wheels.
7 Charge the batteries.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments