Genie TMZ-10 User Manual download pdf (Page 21)

Part No. 72896 Genie TMZ-50/30 & Genie TMZ-17/10 19

Operator's Manual

First Edition • Third Printing

At the Platform Controls

23 Turn the key switch to platform control.

Note: Machines with LED diagnostic readout

perform a self-check when the power is turned on.

The self-check takes about 5 seconds. Do not

touch the buttons of the platform control panel until

the self-check is done.

Test Emergency Stop

24 Push in the platform red Emergency Stop

button to the OFF position.

Result: The engine (if equipped) should turn off.

All ground and platform control functions should

not operate.

Test the Horn

25 Start the engine (if equipped).

26 Push the horn button.

Result: The horn should sound.

Test Machine Functions

27 Press and hold a function enable/speed select

button.

28 Activate each boom function button.

Result: All boom functions should operate

through a full cycle.

FUNCTION TESTS

Test the Drive and Steering (If equipped)

29 Slowly move the drive control handle in the

direction indicated by the blue arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The machine should move in the

direction that the blue arrow points on the drive

chassis, then come to an abrupt stop.

30 Slowly move the drive control handle in the

direction indicated by the yellow arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The machine should move in the

direction that the yellow arrow points on the

drive chassis, then come to an abrupt stop.

Note: The parking brake must be able to hold the

machine on any slope it is able to climb.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Comments to this Manuals

No comments

Genie TMZ-10 User Manual Page 21

Comments to this Manuals