Genie INTELLIG 4024 User Manual download pdf (Page 22)

ADJUSTMENT GUIDE - SPEED SETTINGS FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM

Speed settings are pre-programmed at the factory

for the maximum speed. Speed settings should not

need adjustment with this unit.

However, travel speed for the opener in both the

open and close directions can be adjusted to slower

speeds to minimize normal wear for heavy sectional

doors.

NOTE: One piece doors are automatically set during

Limits programming to the slowest speed and

opener speed cannot be reset for one piece doors.

CHANGE SPEED SETTING

Use this guide to ADJUST powerhead SPEED settings.

There are three (3) Speed settings available on this

unit for the open and close directions. Door type

(one piece or sectional), door weight and balance,

and condition of door components / track affect

door speed. Speed adjustment may not be available

for some installations depending on these factors.

1. Press

PROGRAM

SET

on the powerhead and hold until both

lights turn steady ON. Release button.

Lights go out and Round BLUE light comes ON.

2. Press two times and the Round BLUE and Long

BLUE lights come ON.

3. Press

PROGRAM

SET

once to enter the Speed Programming

menu. The round LED will flash BLUE 3 times,

then the current Speed setting for UP travel will

display on the LEDs. See table below.

4. Press to raise or to lower UP Speed settings

within the available range.

NOTE: Faster door speeds may not be available.

5. Press

PROGRAM

SET

to set UP Speed level. The long LED will

flash BLUE 3 times, then the current Speed setting

for DOWN travel will display on the LEDs.

6. Press to raise or to lower DOWN Speed

settings within the available range.

NOTE: Faster door speeds may not be available.

7. Press

PROGRAM

SET

to set DOWN Speed level. Both LEDs flash

BLUE to confirm.

Speed Level

Powerhead LEDs

Round LED Long LED

Default LED display is the current Speed setting

LED Speed indicator colors

Red

Purple

Blue

Speed Level LED indicator colors

MAXIMUM

Red

MID

Purple

SLOW

Blue

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

Genie INTELLIG 4024 User Manual Page 22

Comments to this Manuals

Related products and manuals for Kitchen Genie INTELLIG 4024