Genie INTELLIG 3024 User Manual download pdf (Page 23)

ADJUSTMENT GUIDE - FORCE SETTINGS FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM

Force settings are pre-programmed at the factory

and "learned" during the Open/Close Limit settings

steps. For normal use Force settings should not

need adjustment with this unit.

However, conditions that might suggest an

adjustment is necessary are;

Doors with very stiff weather seals

Doors that start down, then STOP and reverse

before it is closed

Doors that start up, but STOP before it is

completely open

Force Level

Power Head LEDs

Round LED Long LED

Default LED display is the current Force setting

LED indicator colors

OFF, Blue, Purple, Red

Force Level LED indicator colors

Force Level 1

Blue

OFF

Force Level 2 OFF

Blue

Force Level 3

Blue

Force Level 4

Purple

OFF

Force Level 5 OFF

Purple

Force Level 6

Purple

Force Level 7

Red

OFF

Force Level 8 OFF

Red

Force Level 9

Red

CAUTION

Door closing force is FACTORY set and requires no

adjustment for normal operation.

• Never increase the door closing force to

compensate for a damaged door or a binding

door track.

• Never adjust force to compensate for a broken

door spring.

• Perform monthly CONTACT REVERSE TEST as

described on page 1.

CHANGE FORCE SETTING

Use this guide to ADJUST power head FORCE settings.

NOTE: There are nine (9) force levels. Not all force

levels are available on all models.

Some models come with a reduced range of force

levels. On these models you can adjust Force

settings only within the reduced range.

1. Press

PROGRAM

SET

on the power head and hold till both

lights turn steady ON. Release button.

Lights go out and Round BLUE light comes ON.

2. Press

three times and Round RED light comes

ON. (These Force settings do not scroll.)

3. Press

PROGRAM

SET

once to enter the Force Programming

menu. The power head LEDs will display the

current Force setting. See table below.

4. Press

to raise or to lower UP Force settings

within the available range. (If lower UP Force

setting is good skip to Step 5.)

5. Press

PROGRAM

SET

to set UP Force level.

6. Press to raise or to lower DOWN Force

settings within the available range. (If lower

DOWN Force setting is good skip to Step 7.)

7. Press

PROGRAM

SET

to set DOWN Force level and to exit Force

menu. Both LEDs flash BLUE to confirm.

1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Genie INTELLIG 3024 User Manual Page 23

Comments to this Manuals

Related products and manuals for Kitchen Genie INTELLIG 3024