Genie INTELLIG 3024 User Manual download pdf (Page 15)

3. Press the same button

twice to toggle IntelliCode®

selection from IntelliCode® 2

to IntelliCode® 1.

INTELLICODE® FEATURES

Earlier models of Genie® garage door openers,

remotes, and wireless keypads use IntelliCode®

1 signals to communicate. Remote(s) provided

with this unit will transmit either IntelliCode® 1 or

IntelliCode® 2 signals.

Remote(s) contained in this package are preset

to IntelliCode® 2 and can be configured to

communicate with previously installed IntelliCode®

1 openers. This dual IntelliCode® option allows one

IntelliCode® 2 remote to operate BOTH new and

current models of The Genie Company garage door

openers.

This new Genie® garage door opener will ONLY

accept signals from a remote sending IntelliCode® 2

signals or a Genie® brand IntelliCode® 1 remote that

has been programmed to the opener using a new

IntelliCode® 2 remote.

NOTE: Other remotes not enabled with Genie®

IntelliCode® 2 will not operate this opener.

If you have garage door

openers*

Best choice of

IntelliCode®

programming

One or more IntelliCode® 2

openers.

Maximum 3 different openers

Use IntelliCode® 2

Mixture of openers

manufactured between 1997

and 2010 (IntelliCode® 1) and

new IntelliCode® 2 openers

Use IntelliCode® 2

and/or 1

One or more openers

manufactured between 1997

and 2010 (IntelliCode® 1)

Use IntelliCode® 1

* Maximum 3 different openers per each 3 button

remote.

Programming to previously installed Series II

(IntelliCode® 1) Genie® garage door openers

Remote(s) provided with this unit can operate

earlier (Series II) models of Genie® garage door

openers. The default Series III (IntelliCode® 2)

frequency must be changed to IntelliCode® 1.

(Follow these same steps to change IntelliCode® 1

back to IntelliCode® 2 frequency.)

The LED color displayed on the remote indicates

the IntelliCode® transmitting mode.

Red = IntelliCode® 1 / Green = IntelliCode® 2

1. Select a button on the remote that has NOT been

programmed to the new power head.

2. Press and hold that button for 10 seconds.

Both Red and Green

LEDs come ON and stay

ON.

10 SECS

4. Press the same button again

to confirm toggle. The

IntelliCode® selection for this

button is set to IntelliCode® 1.

5. Take the remote to the earlier Genie® garage

door opener and follow that opener's instructions

to program a new remote.

Repeat for other Genie® garage remote(s) as

necessary.

Red LED Green LED

Three button

remote

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Comments to this Manuals

No comments

Genie INTELLIG 3024 User Manual Page 15

Comments to this Manuals

Related products and manuals for Garage Door Opener Genie INTELLIG 3024