Genie 2022-T Use and Care Manual

For Answers and Assistance: 1.800.354.3643 or visit www.geniecompany.com SAVE THIS MANUAL FOR FUTURE REFERENCE INSTALLER: LEAVE THIS MANUAL WITH HOMEO

Required Programming3REMOTES / New Intellicode 2 OpenersNOTE: The following instructions are for the remote control transmitters (“Remotes”) pro

The Remote button is now programmed.Repeat as necessary for additional Remotes.To program the same Remote for other garage door openers, repeat the st

KEYPADTHE KEYPAD IS PROGRAMMED. Optional Programming4A Moving Door can cause serious injury or death.1 Keep3 Wall Control should be mounted within

Optional Programming4CLEARING MEMORY FOR REMOTESIf the memory has been cleared, the Remote will not activate the door opener.NOTE: The garage doo

INTELLICODE 1 REMOTES Remotes provided with this unit can operate other (Intellicode 1) models of Genie garage door openers. The default Intellicode 2

One-Piece Doors5ATTACHING DOOR BRACKET TO DOORNOTE: Center bracket on door as high as possible, preferably top edge.ATTACHING DOOR ARM TO DOOR BR

Maintenance and Adjustments6If you have any questions, please do not hesitate to contact customer service at: 1-800-35-GENIE or visit www.genieco

WARNING•Useextremecautionwhenworkingfromaladderorstepstool.•Whenreplacinglightcover,makesurewiresarenotpinchedor near movi

Maintenance and Adjustments6 CAUTIONDoor closing force is FACTORY set and requires no adjustment for normal operation.•NEVER adjust the force

Maintenance and Adjustments6ADJUSTMENT GUIDES (continued) Speed Settings (DC motors only)Speed settings are pre-programmed at the factory for the

Safety Information Safety Notifications ... 3 Important Safety Instructions ... 3

Opener circuit wiring diagram. This wiring diagram is for reference only. Wiring Diagram71 2 3 4 5 61 2 37 6POWER CORDCONNECTORWHITEBLACKGREE

Troubleshooting8Opener does NOT runfrom wall console.• Check power source. – Plug a lamp into outlet used for powerhead. If lamp works, power s

Troubleshooting8Powerhead LEDPossible Problem SolutionRound LED Long LEDOFF OFFNormal operation. None required. No response from unit. Check powe

PowerMax® 1200/1500, SC 1200/1500, TriloG™ 1200/1500, PowerLift® 900, GPower™ 900, SilentMax® 1000/1200, CB 1000/1200, IntelliG® 1000/1200 LIMITED WA

Looking for Leading-Edge Technology or the Perfect Update/Replacement?Genie Has the Answer!Leading-EdgeTechnology37337RGLRN-RClosed Conrm Wireless Re

Safety Information1OVERVIEW OF POTENTIAL HAZARDS READ THIS SAFETY INFORMATIONCONVENTIONS USED IN THESE INSTRUCTIONSGarage doors are large, heavy

Features2SAFETY FEATURESSafe-T-Beam® (STB) Non-Contact Reversing SystemPuts an invisible beam across the door opening. The door stops and revers

Required Programming3NOTE: Before you begin programming, check to make sure there are no objects in the garage door opening. INTRODUCTIONNow that

TRAVEL LIMITSNOTE: If shuttle/bullet has NOT been engaged to carriage, do so now. See page 17.NOTE: Before setting limits confirm wall console red ind

Required Programming3The DOWN (closed) limit is programmed.Opening Garage Door (Up Limits)NOTE: Beginning with garage door closed is recommended

Required Programming3 Required Programming3MODEL AC SR3 THE GENIE COMPANYFCC ID: B8Q AC SR3 Residential Door OperatorIC: 2133A-CSD1D 120V. 6

Required Programming3Force and Speed ControlThese controls are factory programmed and automatically set themselves when you use the Wall Console