Genie Z34N-2100 Z-34 User Manual download pdf (Page 18)

16 Genie Z-34/22 & Genie Z-34/22N Part No. 43654

Operator's Manual Second Edition • Ninth Printing

FUNCTION TESTS

Test Machine Functions

18 Move the lift/drive select switch to the lift

position (if equipped).

19 Press down the foot switch.

20 Activate each machine function toggle switch.

Result: All boom/platform functions should

operate through a full cycle.

Note: Control the speed of boom functions by

adjusting the boom function speed controller.

Drive and steer functions are not affected by the

boom function speed controller.

Machines equipped with Platform Level Control

Disable Function: The platform level toggle switch

will not operate when the primary boom is raised

past the drive speed limit switch.

Test the Steering

21 Move the lift/drive select switch to the drive

position (if equipped).

22 Press down the foot switch.

23 Depress the thumb rocker switch on top of the

drive control handle in the direction identified

by the blue triangle on the control panel.

Result: The steer wheels should turn in the

direction that the blue triangles point on the

drive chassis.

24 Depress the thumb rocker switch in the direction

identified by the yellow triangle on the control

panel.

Result: The steer wheels should turn in the

direction that the yellow triangles point on the

drive chassis.

Test Drive and Braking

25 Move the lift/drive select switch to the drive

position (if equipped).

26 Press down the foot switch.

27 Slowly move the drive control handle in the

direction indicated by the blue arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The travel alarm should sound. The

machine should move in the direction that the

blue arrow points on the drive chassis, then

come to an abrupt stop.

28 Slowly move the drive control handle in the

direction indicated by the yellow arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The travel alarm should sound. The

machine should move in the direction that the

yellow arrow points on the drive chassis, then

come to an abrupt stop.

Note: The brakes must be able to hold the machine

on any slope it is able to climb.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Genie Z34N-2100 Z-34 User Manual Page 18

Comments to this Manuals

Related products and manuals for For the car Genie Z34N-2100 Z-34