Genie Z-34 User Manual download pdf (Page 37)

Operator's Manual

Fourth Edition • Third Printing

Part No. 1000048 Z-34/22 IC 35

Specifications

Z-34/22 2WD Industrial

Height, working maximum 40 ft 6 in 12.5 m

Height, platform maximum 34 ft 6 in 10.5 m

Height, stowed maximum 6 ft 7 in 2 m

Horizontal reach maximum 22 ft 3 in 6.8 m

Width 5 ft 8 in 1.7 m

Length, stowed 18 ft 6 in 5.6 m

Maximum load capacity 500 lb 227 kg

Maximum wind speed 28 mph 12.5 m/s

Wheelbase 6 ft 2 in 1.9 m

Turning radius (outside) 13 ft 1 in 4 m

Turning radius (inside) 5 ft 9 in 1.8 m

Ground clearance 6 in 15 cm

Turntable rotation (degrees) 355°

Turntable tailswing 0

Platform leveling self-leveling

Platform rotation (degrees) 180°

Controls 12V DC proportional

Platform dimensions, 56 in x 30 in

(length x width) 1.4 m x 76 cm

Power source Kubota G/LPG 24.5 hp

OR Kubota Diesel 26 hp

Fuel capacity 9.3 gallons 35.2 liters

AC outlet in platform standard

Hydraulic pressure, maximum 3200 psi 220.7 bar

(boom functions)

System voltage 12V

Tires size (ANSI)

Industrial 9-14.5

Rough terrain 10-16.5NHS

Tires size (CE and Australia)

Foam filled only 9-14.5

Continuous improvement of our products is a Genie

policy. Product specifications are subject to change

without notice or obligation.

Weight See Serial Plate

(Machine weights vary with option configurations)

Airborne noise emissions 80 dB

Maximum sound level at normal operating workstations

(A-weighted)

Drive speeds, maximum,

Boom stowed 4.0 mph 6.4 km/h

40 ft/6.8 sec12.2 m/6.8 sec

Boom 0.7 mph 1.0 km/h

raised or extended 40 ft/40 sec 12.2 m/40 sec

Maximum slope rating, stowed position, 2WD

Counterweight uphill 37% 20°

Counterweight downhill 20% 11°

Side slope 25% 14°

Note: Slope rating is subject to ground conditions and

adequate traction.

Floor Loading Information

Tire load, maximum 5300 lbs 2404 kg

Tire contact pressure (per tire) 100 psi 7.03 kg/cm

689 kPa

Occupied floor pressure 221 psf 10.58 kPa

1079 kg/m

Note: Floor loading information is approximate and does

not incorporate different option configurations. It should be

used only with adequate safety factors.

1 2 ... 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 37

Comments to this Manuals

Related products and manuals for For the car Genie Z-34