Genie Z-34 User Manual download pdf (Page 23)

Part No. 56011 Genie Z-34/22 Bi-Energy 21

Operator's Manual

First Edition • Fifth Printing

Drive Enable

Light on indicates that the boom has moved just

past either non-steer wheel and drive function has

been interrupted.

To drive, hold the drive enable switch to either

side and slowly move the drive control handle off

center.

Be aware that the machine may move in the

opposite direction that the drive and steer controls

are moved.

Always use the color-coded direction arrows on

the platform controls and the drive chassis to

identify the direction the machine will travel.

Low Battery Indicator Light

Flashing light indicates battery power is low and

the batteries need to be charged. Running the

engine will charge the batteries.

Light on indicates the batteries are fully discharged.

Run the engine to charge the batteries.

Note: Charging the batteries with the engine does

not fully charge the batteries. Use the AC charger

to fully charge the batteries at the end of machine

use.

Note: Machines equipped with Low Voltage

Interrupt Option will lose primary and secondary

boom lift functions when batteries are fully

discharged.

OPERATING INSTRUCTIONS

Engine Idle Select (rpm)

Select engine idle (rpm) using the symbols on the

control panel. Engine idle speed does not affect

machine function speed.

· Rabbit and foot switch symbol:

foot switch activated high idle

· Turtle symbol: low idle and slow battery

charging

· Rabbit symbol: high idle and quickest battery

charging

At high idle, the engine supplies enough power for

charging and for machine functions. At low idle,

machine functions will use battery power.

Auxiliary Controls

Use auxiliary power if the primary power source

fails.

1 Turn the key switch to ground or platform

control.

2 Pull out the red Emergency Stop button to the

on position.

3 Press down the foot switch when operating the

auxiliary controls from the platform.

4 Simultaneously hold the auxiliary power switch

on and activate the desired function.

The drive function will not operate with auxiliary

power.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 23

Comments to this Manuals

Related products and manuals for For the car Genie Z-34