Genie Z-34 User Manual download pdf (Page 17)

Part No. 56011 Genie Z-34/22 Bi-Energy 15

Operator's Manual

First Edition • Fifth Printing

FUNCTION TESTS

Test the Tilt Sensor

9 Turn the key switch to platform control. Pull out

the platform red Emergency Stop button to the

on position.

10 Open the ground control side turntable cover and

locate the tilt sensor.

11 Press down one side of the tilt

sensor and hold for 5 seconds.

Result: The alarm, located in the

platform, should sound.

Test Auxiliary Controls

12 Turn the key switch to ground control.

13 Pull out the red Emergency Stop button to the

on position.

14 Simultaneously hold the auxiliary power switch

on and activate each boom function toggle

switch.

Note: To conserve battery power, test each

function through a partial cycle.

Result: All boom functions should operate.

At the Platform Controls

15 Turn the key switch to platform control.

16 Pull out the red Emergency Stop button to

the on position.

Result: The beacon (if equipped) should flash.

17 Start the engine. See Operating Instructions

section.

Test the Emergency Stop

18 Push in the platform red Emergency Stop button

to the off position.

Result: The engine should turn off and all

functions should not operate.

19 Pull out the red Emergency Stop button to

the on position.

Test the Horn

20 Push the horn button.

Result: The horn should sound.

Test the Foot Switch

21 Press down the foot switch and attempt to start

the engine by moving the start toggle switch to

either side.

Result: The engine should not start.

22 Do not press down the foot switch. Test each

machine function.

Result: The machine functions should not

operate.

Test Machine Functions

23 Press down the foot switch.

24 Activate each machine function control handle

or toggle switch.

Result: All boom/platform functions should

operate through a full cycle.

Note: Control the speed of boom functions by

adjusting the boom function speed controller.

Drive and steer functions are not affected by the

boom function speed controller.

Machines equipped with Platform Level Control

Disable Function: The platform level toggle switch

will not operate when the primary boom is raised

past the drive speed limit switch.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 17

Comments to this Manuals

Related products and manuals for For the car Genie Z-34