Genie Z-34 User Manual download pdf (Page 14)

12 Genie Z-34/22 Bi-Energy Part No. 56011

Operator's Manual First Edition • Fifth Printing

Check the Batteries

Proper battery condition is essential to good engine

performance and operational safety. Improper fluid

levels or damaged cables and connections can

result in engine component damage and hazardous

conditions.

Bodily injury hazard. Batteries

contain acid. Avoid spilling or

contacting battery acid. Neutralize

battery acid spills with baking

soda and water.

Charging the batteries with the

engine does not fully charge the

batteries. Periodically, use the AC

battery charger to fully charge the

batteries.

Perform this test after fully

charging the batteries.

1 Put on protective clothing and eye wear.

2 Be sure that the battery cable connections are

tight and free of corrosion.

3 Be sure the battery hold-down bracket is tight.

4 Remove the battery vent caps.

5 Check the battery acid level. If needed,

replenish with distilled water to the bottom of

the battery fill tube. Do not overfill.

6 Install the vent caps.

MAINTENANCE

Check the Engine Oil Level

Maintaining the proper engine oil level is essential

to good engine performance and service life.

Operating the machine with an improper oil level

can damage engine components.

Check the oil level with the

engine off.

1 Check the oil level dipstick.

Result: The oil level should be at the FULL mark

on the dipstick.

2 Add oil if necessary.

Kubota Engine Z482-E

Oil viscosity requirements 10W-40

Engine oil should have properties of API classification

CC/SE, CD/SE, CC/SF or CD/SF grades. Units ship

with 10W-40 SG/CC

Check the Engine Coolant Level

Maintaining the engine coolant at the proper level

is essential to engine service life. Improper coolant

level will affect the engine's cooling capability and

damage engine components. Daily checks will

allow the inspector to identify changes in coolant

level that might indicate cooling system problems.

1 Check the fluid level in the coolant recovery

tank. Add fluid as needed.

Result: The fluid level should be at the

FULL mark.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 14

Comments to this Manuals

Related products and manuals for For the car Genie Z-34