Genie GL-12 User Manual download pdf (Page 11)

Part No. 35566 Genie Lift 9

Operator's ManualFirst Edition • Sixth Printing

Pre-operation Inspection

o Be sure that the operator’s manual is complete,

legible and available for reference.

o Be sure that all decals are legible and in place.

See Decals section.

Check the following components or areas for

damage, improperly installed or missing parts and

unauthorized modifications:

o Winch and related components

o Base components

o Legs

o Roller wheels

o Inner and outer frames

o Glide buttons

o Carriage hold-down assembly

o Cable anchor

o Cable and pulleys

o Wheels and casters

o Forks

o Load platform and boom (if equipped)

o Nuts, bolts and other fasteners

o Cable (kinks, frays, abrasions)

o Ladder (if equipped)

o Brake system (if equipped)

o Limit switch (electric winch models)

o Electric winch and related components

(if equipped)

o Hand controls and wiring (electric winch

models)

PRE-OPERATION INSPECTION

Check the entire machine for:

o Dents or damage

o Corrosion or oxidation

o Cracks in welds or structural components

o Be sure that all structural and other critical

components are present and all associated

fasteners and pins are in place and properly

tightened.

o Inspect and clean the battery terminals and all

battery cable connections.

o Be sure there is a minimum of 4 wraps of cable

around the winch drum when the carriage is

fully lowered.

o Be sure the frame channels are properly

lubricated and free of debris. Lubricate the

channels with a dry silicone spray or silicone

wax (Genie part number 90337).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Comments to this Manuals

No comments