Genie Z-25J User Manual Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
Operator's Manual Fourth Edition · First Printing
56 Z-45/25 • Z-45/25J Part No. 114339
Narrow Base Models Z-45/25J (jib)
Height, working maximum 51 ft 9 in 15.9 m
Height, platform maximum 45 ft 9 in 13.9 m
Height, stowed maximum 6 ft 7 in 2.0 m
Horizontal reach maximum 25 ft 1 in 7.7 m
Width 5 ft 10.3 in 1.79 m
Length, stowed 22 ft 5 in 6.8 m
Maximum load capacity 500 lbs 227 kg
Maximum load capacity
Models with Aircraft Protection
Package 440 lbs 200 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 6 ft 8 in 2.0 m
Turning radius (outside) 14 ft 4.3 m
Turning radius (inside) 6 ft 1.8 m
Turntable rotation 355°
Turntable tailswing 0 in 0 cm
Drive speed, stowed 5 mph 8.0 km/h
40 ft/5.5 sec12.2 m/5.5 sec
Drive speed, 0.4 mph 0.64 km/h
booms raised 40 ft/68 sec 12.2 m/68 sec
Airborne noise emissions 73 dB
Maximum sound level at normal operating workstations
(A-weighted)
Ground clearance, center 9.5 in 24.1 cm
Ground clearance, minimum 7.5 in 19.1 cm
Controls 12V DC proportional
Weight See Serial Label
(Machine weights vary with option configurations)
Platform dimensions, 6 foot 72 in x 30 in
(length x width) 1.8 m x 76 cm
Platform leveling self-leveling
Platform rotation 160 degrees
Vibration value does not exceed 2.5 m/s
2
AC outlet in platform standard
Hydraulic pressure, maximum 3200 psi 221 bar
(boom functions)
System voltage 12V
Tire size, 2WD Industrial
Foam-filled only 9-14.5 LT
Maximum slope rating, stowed position
Platform downhill 30% (17°)
Platform uphill 25% (14°)
Side slope 25% (14°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Fuel tank capacity 17 gallons 64.4 liters
Floor loading information
Tire load, maximum 8800 lbs 3992 kg
Tire contact pressure 100 psi 7.03 kg/cm
2
689 kPa
Occupied floor pressure 328 psf 1601 kg/m
2
15.70 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Specifications
Page view 57
1 2 ... 53 54 55 56 57 58 59

Comments to this Manuals

No comments