Genie Z-25J User Manual download pdf (Page 56)

Operator's Manual Fourth Edition · First Printing

54 Z-45/25 • Z-45/25J Part No. 114339

Specifications

Standard Base Models Z-45/25J (jib)

Height, working maximum 52 ft 2 in 16.07 m

Height, platform maximum 46 ft 2 in 14.07 m

Height, stowed maximum 6 ft 11 in 2.1 m

Horizontal reach maximum 25 ft 1 in 7.6 m

Width 7 ft 6 in 2.29 m

Length, stowed 22 ft 5 in 6.83 m

Maximum load capacity 500 lbs 227 kg

Maximum load capacity

Models with Aircraft Protection

Package 440 lbs 200 kg

Maximum wind speed 28 mph 12.5 m/s

Wheelbase 6 ft 8 in 2.0 m

Turning radius (outside) 14 ft 9 in 4.5 m

Turning radius (inside) 5 ft 6 in 1.7 m

Turntable rotation 355°

Turntable tailswing 0 in 0 cm

Drive speed, stowed 5 mph 8.0 km/h

40 ft/5.5 sec12.2 m/5.5 sec

Drive speed, 0.6 mph 1 km/h

booms raised 40 ft/45 sec 12.2 m/45 sec

Airborne noise emissions 73 dB

Maximum sound level at normal operating workstations

(A-weighted)

Ground clearance, center 15.5 in 39.4 cm

Ground clearance, minimum 11.5 in 29.2 cm

Controls 12V DC proportional

Weight See Serial Label

(Machine weights vary with option configurations)

Platform dimensions, 6 foot 72 in x 30 in

(length x width) 1.8 m x 76 cm

Platform leveling self-leveling

Platform rotation 160 degrees

Vibration value does not exceed 2.5 m/s

AC outlet in platform standard

Hydraulic pressure, maximum 3200 psi 221 bar

(boom functions)

System voltage 12V

Tire size, 4WD & 2WD RT 355/55 D625

Tire size, High Flotation 33/16LL 500, 10 ply

Maximum slope rating, stowed position, 2WD

Platform downhill 30% (17°)

Platform uphill 25% (14°)

Side slope 25% (14°)

Maximum slope rating, stowed position, 4WD

Platform downhill 45% (24°)

Platform uphill 25% (14°)

Side slope 25% (14°)

Note: Slope rating is subject to ground conditions and

adequate traction.

Fuel tank capacity 17 gallons 64.4 liters

Floor loading information

Tire load, maximum 8800 lbs 3992 kg

Tire contact pressure 50 psi 3.51 kg/cm

345 kPa

Occupied floor pressure (2WD) 196 psf 957 kg/m

9.38 kPa

Occupied floor pressure (4WD) 198 psf 967 kg/m

9.48 kPa

Note: Floor loading information is approximate and

does not incorporate different option configurations. It

should be used only with adequate safety factors.

Continuous improvement of our products is a Genie

policy. Product specifications are subject to change

without notice or obligation.

1 2 ... 51 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments

Genie Z-25J User Manual Page 56

Comments to this Manuals