Genie Z-25J User Manual download pdf (Page 36)

Operator's Manual Fourth Edition · First Printing

34 Z-45/25 • Z-45/25J Part No. 114339

Inspections

Test the Oscillate Axle

(oscillating axle-equipped models)

46 Start the engine from the platform controls.

47 Drive the right steer tire up onto a 6 inch /

15 cm block or curb.

Result: The three remaining tires should stay in

firm contact with the ground.

48 Drive the left steer tire up onto a 6 inch /

15 cm block or curb.

Result: The three remaining tires should stay in

firm contact with the ground.

49 Drive both steer tires up onto a 6 inch /

15 cm block or curb.

Result: The non-steer tires should stay in firm

contact with the ground.

Test Auxiliary Controls

50 Shut the engine off.

51 Pull out the red Emergency Stop button to

the on position.

52 Press down the foot switch.

53 Simultaneously hold the auxiliary power switch

on and activate each function control handle or

toggle switch.

Note: To conserve battery power, test each

function through a partial cycle.

Result: All boom and steer functions should

operate. Drive functions should not operate with

auxiliary power.

Test the Lift/Drive Select Function

(if equipped)

54 Press down the foot switch.

55 Move the drive control handle off center and

activate a boom function toggle switch.

Result: No boom functions should operate. The

machine will move in the direction indicated on

the control panel.

56 Repair any malfunctions before operating the

machine.

Test Aircraft Protection Package (if equipped)

57 Move the gray bumper at the bottom of the

platform 4 inches / 10 cm in any direction.

58 Activate each function control handle or toggle

switch.

Result: All boom and steer functions should not

operate.

59 Move the function override switch to either side.

60 Activate each function control handle or toggle

switch.

Result: All boom and steer functions should

operate.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Comments to this Manuals

No comments

Genie Z-25J User Manual Page 36

Comments to this Manuals