Genie Z-25J User Manual download pdf (Page 34)

Operator's Manual Fourth Edition · First Printing

32 Z-45/25 • Z-45/25J Part No. 114339

Blue

Yellow

Test Drive and Braking

29 Press down the foot switch.

30 Slowly move the drive control handle in the

direction indicated by the blue arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The machine should move in the

direction that the blue arrow points on the drive

chassis, then come to an abrupt stop.

31 Slowly move the drive control handle in the

direction indicated by the yellow arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The machine should move in the

direction that the yellow arrow points on the

drive chassis, then come to an abrupt stop.

Note: The brakes must be able to hold the machine

on any slope it is able to climb.

Test the Drive Enable System

32 Press down the foot switch and lower the boom

to the stowed position.

33 Rotate the turntable until the primary boom

moves past one of the non-steer wheels.

Result: The drive enable

indicator light should

come on and remain on

while the boom is

anywhere in the range

shown.

34 Move the drive control handle off center.

Result: The drive function should not operate.

35 Move and hold the drive enable toggle switch to

either side and slowly move the drive control

handle off center.

Result: The drive function should operate.

Note: When the drive enable system is in use, the

machine may drive in the opposite direction that the

drive and steer control handle is moved.

Use the color-coded direction

arrows on the platform

controls and the drive

chassis to identify the

direction of travel.

Inspections

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 58 59

Comments to this Manuals

No comments

Genie Z-25J User Manual Page 34

Comments to this Manuals