Genie Z-25J User Manual download pdf (Page 25)

Operator's ManualFourth Edition · First Printing

Part No. 114339 Z-45/25 • Z-45/25J 23

12 Dual axis proportional control handle for drive

and steer functions

OR Proportional control handle for drive function

and thumb rocker for steer function

Move the control handle in the direction

indicated by the blue arrow on the control panel

and the machine will drive forward. Move the

control handle in the direction indicated by the

yellow arrow and the machine will drive

backwards. Move the control handle in the

direction indicated by the blue triangle and the

machine will steer to the left. Move the control

handle in the direction indicated by the yellow

triange and the machine will steer to the right.

Move the control handle in the direction

indicated by the blue arrow on the control panel

and the machine will drive forward. Move the

control handle in the direction indicated by the

yellow arrow and the machine will drive

backwards. Press the left side of the thumb

rocker and the machine will steer to the left.

Press the right side of the thumb rocker and the

machine will steer to the right.

13 Not used

14 Machine not level indicator light (if equipped)

The machine not level indicator light will come

on when the tilt alarm sounds.

15 Drive enable indicator light

Light on indicates that the boom has moved just

past either non-steer wheel and drive function

has been interrupted.

16 Drive enable switch

To drive when the drive enable light is on, hold

the drive enable switch to either side and slowly

move the drive control handle off center. Be

aware that the machine may move in the

opposite direction that the drive and steer

controls are moved.

17 Proportional control handle for secondary boom

up/down function

Move the control handle up

and the secondary boom

will raise. Move the control

handle down and the

secondary boom will lower.

18 Primary boom extend/retract switch

Move the primary boom

switch up and the primary

boom will retract. Move the

primary boom switch down

and the primary boom will

extend.

19 Used for optional equipment

20 Dual axis proportional control handle for primary

boom up/down and turntable rotate left/right

functions

Move the control handle up and

the primary boom will raise.

Move the control handle down

and the primary boom will

lower. Move the control handle

to the right and the turntable

will rotate to the right. Move the

control handle to the left and the

turntable will rotate to the left.

Controls

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 58 59

Comments to this Manuals

No comments

Genie Z-25J User Manual Page 25

Comments to this Manuals